One of the most difficult telecommunications products to field-terminate is the modular patch cord. It requires practice, patience and manual dexterity to assemble a patch cord...
Often, copper and fiber-optic cables must be placed in flexible conduit or duct to conform to regulatory safety codes, meet customer requirements or provide protection from environmenta...
The subtleties of testing Category 5 channels are just becoming apparent to those who design structured cabling systems and the installers and contractors who must test them. ...
All or part of your cabling system has been installed with T568A-wired jacks on one end (patch panel) and T568B-wired jacks on the other end (work area). In this case, when the...
A common problem in testing optical fiber for loss is determining a loss budget to compare to actual measurements made by an optical-loss test set (see "Determining optical fiber...
Q: I read that TIA/EIA-568A was approved. However, I cannot get a copy in Japan. Can we get a copy of the current standard through the Internet? If so, where is the access point...
The Building Industry Consulting Service International Inc. conference held in Toronto, June 5 to 8, 1995, included multimedia and networking topics. Approximately 750 attendees...
At a technical seminar I recently attended, the subject of product knowledge and salesmanship came up. The Light Brigade`s president, Larry Johnson, who was giving the seminar...
Corning Inc. (Corning, NY) has announced that its Optical Fiber Information Center is now available on Internet?s World Wide Web. If you work with optical fiber, you will find...
The firestopping split-sleeve system, previously made of aluminum, now consists of black iron. Available in 1-, 2- and 4-inch sizes, this system brings to within code those cables...
This 5-pair S110 termination tool, with replaceable cutting blades and an ergonomically designed handle, terminates and cuts UTP cable. This multi-pair impact tool terminates ...