LAN protectors | Cabling Installation & Maintenance

CAT5-LAN Protectors respond to fast-moving transient voltages in less than 2 to 5 nanoseconds and automatically reset for continuous protection of sensitive electronic workstations, network equipment, and communications cables. Prespecified clamping voltage protects lan equipment applications at 16V. The device provides 100% solid-state protection with 110 connectors in a 4-pair module for lan circuits.

ITW Linx

Chicago, IL

More in Connectivity

Gears 1443874 960 720

ICT Friday 5: Ideal Networks, Belden, TIA trending

A round-up of CablingInstall.com's top 5 trending stories of the past week, geared toward information and communications technology (ICT) professionals.

Yellowsinglemode

Web seminar highlights passive optical LAN’s flexibility, 10G capability

Alpha Technologies, EXFO and Tellabs will deliver the event live on Thursday, September 19.

ADVA says its FSP 150-XG118Pro edge hosting device is optimized for ultra-reliable low-latency communications to maximize 5G efficiency.

Multi-layer cell site gateway enables rapid 5G rollouts over existing LTE infrastructure

ADVA bills its FSP 150-XG118Pro as 'the edge device that communication service providers and enterprises have been waiting for [that] delivers risk-free migration to NFV services.'

Wirewerks appoints new North American sales manager

Steve Nesbitt has been promoted to the role of Wirewerks' North American sales manager, effective immediately.

Ideal Networks' VisiLINQ permanent link adapters optimize usage of the communications test equipment manufacturer's LanTEK IV certifiers.

Permanent link adapters test, certify UTP, STP, Cat5e/6/6a/8.1 cabling

Learn how Ideal Networks' VisiLINQ permanent link modules optimize usage of the test equipment manufacturer's LanTEK IV certifiers from patch panel to outlet.

FSR appoints new U.S. Western regional sales manager

Philip Klinkenborg joins FSR as the company's new U.S. Western Regional Sales Manager.

AFL boosts furcation tubing line to aid fanout to single fiber connections

Enhanced tubing options are now available for traditional single 250 µm fiber applications, dual fiber 250 µm applications such as uniboot LC and single fiber 900 µm tight buffered applications.

Fn Dsx Cha 5 Ix 02a W

Fluke Networks issues DSX CableAnalyzer adapter for ix Industrial Ethernet connector

A joint development of Hirose and Harting, The ix Industrial is a rugged Ethernet connector for harsh environments, based on IEC 61076-3-124 standard with a 70% smaller size than the traditional 8-pin modular ('RJ-45') connector.

Siemon launches PowerGUARD brand

The company has engineered enhancements into its twisted-pair outlets, plugs, cables and patch cords for remote-powering applications like PoE and PoH.

Senko intros LC EZ-Flip polarity reversible fiber-optic connector

Senko asserts that technicians can change the polarity of the LC EZ-Flip within 3 seconds.

Polarity-changing Uniboot Fiber Patch Cord

The connector’s push-pull design makes MACs easier in data center and enterprise networks, Panduit says.

Icc Story Cat6 Structured Cabling System 06 29 2018

ICC Elite Installers awarded Cat 6 cabling contracts in Montana

ICC Elite Installers were recently contracted to deploy Category 6 structured cabling systems in Missoula and Great Falls, MT.

EtherNet/IP IO-Link master block insulates against EMI

Balluff's new EtherNet/IP IO-Link master block insulates against inductive, conductive, and capacitive noise produced by electromagnetic interference (EMI).

United States Bankruptcy Court Seal

RFQ: CAT 6 cabling contract opportunity available at GSA USBC

As posted at Lemonwire-GovMik, 'The project is for the US Bankruptcy Court Clerk's office and Chambers and is located on the 7th Floor at the AA Ribicoff Federal Building, Hartford, CT.'