Tyco, Microsemi build PoE into RJ-45

This technological development will make it easier for switch manufacturers to build endspan PoE devices, the two companies say.

Microsemi Corporation and Tyco Electronics recently unveiled an RJ-45 connector with built-in Power over Ethernet (PoE) technology. When announcing the product, the two companies stated that until this technological development, the ability to deliver power together with data and voice over a standard Ethernet cable along with power management typically were provided by an application-specific integrated circuit (ASIC), an integrated module, or a midspan device.

This innovation, they said, enables enhanced PoE functionality to be embedded within the RJ-45 connector, which reduces the cost, footprint, and desing-cycle time associated with integrating PoE into Ethernet switches.

View a webcast seminar on Power over Ethernet Plus.


FULL PRESS RELEASE

Tyco Electronics, Microsemi Deliver Most Advanced LAN Connector With Power over Ethernet Plus
Joint Development Embeds PoE Chipset Within the Connector

IRVINE, Calif. and RENO, Nev., Mar 11, 2010 (GlobeNewswire via COMTEX News Network) -- Microsemi Corporation (Nasdaq:MSCC), a leading manufacturer of high performance analog mixed-signal integrated circuits and high reliability semiconductors, and Tyco Electronics (NYSE:TEL), a global leader in electronic components, announced today the delivery of the industry's most advanced RJ-45 connector with built-in power over Ethernet (PoE) technology.

Until now, Enhanced capabilities - the ability to deliver power together with data and voice over a standard Ethernet cable with power management - were typically provided as an ASIC, an integrated module or as a midspan device. This latest innovation enables Enhanced PoE functionality to be embedded within the RJ-45 connector, reducing the cost, footprint and design-cycle time associated with integrating PoE into Ethernet switches.

Tyco Electronics' RJ-45 connector, enhanced by Microsemi's advanced PD69012 device, is expected to reduce the number of components and assembly cost for manufacturers who are designing next-generation Ethernet switches with IEEE 802.3af-compliant or IEEE802.3at-compliant PoE functionality. It is the first RJ-45 connector in the market capable of delivering IEEE802.3at power with built-in high end power management capabilities including dynamic power management, emergency power management, backplane power management and resilient power management.

An integrated PoE RJ-45 connector will be critical for vendors who are designing complex Gigabit Ethernet switches that have very little room on the printed circuit board for additional electronic circuitry. The RJ-45 connector comes in two pin-out configurations, one fully compatible with the PoETec 2.0 industry standard, and another with the additional power management capabilities.

"As a founder of the IEEE 802.3af and IEEE802.3at standard task forces, which also boasts an impressive list of Ethernet switch vendors, Microsemi continues to prove its leadership in PoE design and PoE chip technology," said Marcus McElroy, Product Manager at Tyco Electronics. "Harnessing both companies' engineering expertise, we have developed the industry's most advanced RJ-45 connector with Power over Ethernet Plus technology, which will provide an easy migration path for our existing PoE RJ-45 connector customers and an extremely attractive solution for new customers."

"Tyco Electronics' leadership in the RJ-45 connector market and Microsemi's expertise in PoE technology and IC design enable a level of integration and functionality that is unique in the industry," said Daniel Feldman, Director of Marketing, Power over Ethernet, at Microsemi. "This joint continued effort that started in 2004 will truly benefit Ethernet switch manufacturers who are looking to add PoE Plus functionality to their next-generation products. Working together also brings us one step closer to rapid deployment of Power over Ethernet functionality in next-generation switches."

Tyco Electronics has begun to deliver samples of the 2x6 PoE RJ-45 connector. Tyco Electronics and Microsemi also plan to develop 2x4 and 2x8 PoE RJ-45 connectors.

About Power over Ethernet Technology

PoE is a technology for wired Ethernet, the most widely installed local area network technology in use today. PoE allows the electrical power necessary for the operation of each device, to be carried by data cables rather than by separate power cords. It minimizes the number of wires that must be used in order to install the network, resulting in lower cost, less downtime, easier maintenance and greater installation flexibility.

About Microsemi

Microsemi Corporation, with corporate headquarters in Irvine, California, is a leading designer, manufacturer and marketer of high performance analog and mixed-signal integrated circuits, high reliability semiconductors and RF subsystems. The company's semiconductors manage and control or regulate power, protect against transient voltage spikes and transmit, receive and amplify signals.

Microsemi's products include individual components as well as integrated circuit solutions that enhance customer designs by improving performance and reliability, battery optimization, reducing size or protecting circuits. The principal markets the company serves include implanted medical, defense/aerospace and satellite, notebook computers, monitors and LCD TVs, automotive and mobile connectivity applications. More information may be obtained by contacting the company directly or by visiting its website at http://www.microsemi.com.

The Microsemi Corporation logo is available at http://www.globenewswire.com/newsroom/prs/?pkgid=1233

About Tyco Electronics

Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions, specialty products and undersea telecommunication systems, with fiscal 2009 sales of US$10.3 billion to customers in more than 150 countries. We design, manufacture and market products for customers in a broad array of industries including automotive; data communication systems and consumer electronics; telecommunications; aerospace, defense and marine; medical; energy; and lighting. With approximately 7,000 engineers and worldwide manufacturing, sales and customer service capabilities, Tyco Electronics' commitment is our customers' advantage. More information on Tyco Electronics can be found at http://www.tycoelectronics.com/.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements concerning the delivery of the industry's most advanced RJ-45 connector with built-in power over Ethernet (PoE) technology, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

More in Connectivity