Expert webinar to address managing change in data center cabling and systems

Sept. 14, 2015
Sept. 17 webcast is sponsored by Chatsworth, OFS and Panduit.

On September 17 at 1:00 PM EDT, Cabling Installation & Maintenance will host a webast entitled Managing Change in Data Center Cabling and Systems.

Approved for 1 BICSI ITS CEC [Continuing Education Credit], the seminar will be presented by Sam Rodriguez, Sr. Product Manager, Cabinet & Thermal Solutions, Chatsworth Products, Inc. (CPI); Stephen Morris, Senior Product Manager at Panduit; and Tony Irujo, Sales Engineer, Optical Fiber, at OFS. The presentation will run for approximately one hour, and is free to attend.

As the vital central nervous system of business operations, a data center must deliver solid, consistent performance from every system—network cabling, supporting infrastructure, climate control, monitoring and others. Yet at the same time, data centers are subject to frequent change and reconfiguration. As such, these environments must be both solid and dependable, while also being flexible to update or upgrade.

The webcast seminar examines technologies and product characteristics that enable data centers to remain both dependable and flexible. A description of each presentation is as follows:

Presentation 1: Making Your Facility Seismic-Ready
A seismic event is one change a data center administrator never wants to have to manage; but for many, the possibility is an everyday reality. Additionally, data centers located outside of geographies typically associated with seismic activity are well-served to keep their equipment seismic-ready. This presentation focuses specifically on equipment cabinets, and how data center administrators can prepare them, to the extent possible, for a seismic event. It discusses cabinets that are built to be seismic-ready, as well as hardware that can be used to enhance existing cabinets’ seismic-preparedness.

Presentation 2: Cabling Performance Options for Multi-Generation Network Speeds
A data center cabling system is intended to support multiple generations of data transmission speeds, making it a more-permanent portion of the infrastructure than the network gear it supports. In order to truly support several generations of networking, the cabling must have sufficient bandwidth and throughput capacity. This presentation explains the capabilities of different optical fibers and fiber-optic cabling systems, and the extent to which these systems can support current and future transmission speeds.

Presentation 3: Design, Build and Test MPO-based Fiber Links for Higher Data Rate Applications
This presentation will cover best practices for building and commissioning high-speed fiber-based links in the data center, highlighting the differences between traditional methods and a new array of connector methods (MPO/MTP). Effective planning and specification (polarity, gender, loss budget, etc.) of parallel optics cabling for complex data center channels, and a detailed examination of polarity and gender issues that arise in link testing, will be discussed.

Register for the webcast.

Sponsored Recommendations

Cat 6A Frequently Asked Questions

April 29, 2024
At CommScope we know about network change and the importance of getting it right. Conclusion Category 6A cabling and connectivity.

Revolutionize Your Network with Propel Fiber Modules

Oct. 24, 2023
Four sizes of interchangeable Propel fiber modules provide the breadth of capabilities for virtually any configuration.

Elevate Your Network with Propel High-Density Panels

Oct. 24, 2023
Propel Series Sliding Fiber Optic Panels

Constellation™ - Explore power and data products

Oct. 24, 2023
Discover the Essentials for Building Your Power and Data System!