Dätwyler Cables adds WLAN components to Unilan cabling systems

Feb. 11, 2009
February 11, 2009--Using the WLAN technology Xirrus, Dätwyler Cables has added Wi-Fi arrays to its Unilan cabling portfolio. The arrays optionally integrate 4, 8, 12 or 16 "self-adjusting" access points (according to IEEE 802.11abg+n), have high-amplifying directional sector antennas, a Gigabit Ethernet switch, the Wi-Fi controller, a threat sensor, and a Stateful Inspection Firewall--all in one housing.

February 11, 2009--Using the WLAN technology Xirrus, Dätwyler Cables has added Wi-Fi arrays to its Unilan cabling portfolio. The arrays optionally integrate 4, 8, 12 or 16 "self-adjusting" access points (according to IEEE 802.11abg+n), have high-amplifying directional sector antennas, a Gigabit Ethernet switch, the Wi-Fi controller, a threat sensor, and a Stateful Inspection Firewall--all in one housing.

These arrays provide ranges from 7,000 to 11,600 square meters, coverage up
to 1,024 users per device, data throughputs of up to 864 Mbits/sec, and
bandwidths of 2 Gbits each. They are appropriate for professional use in the office environment, in conference centers and educational institutions, in production and logistics, hotels and hospitals, as well as in airports.

To guarantee a safe data transfer and energy supply of the device, Dätwyler
Cables recommends installation of a shielded twisted-pair data cable
with a high conductor cross-section to feed it. The company offers a series of housing and installation solutions designed to ensure full integration into the infrastructure, and also ensure that business-critical security requirements are upheld.

The Xirrus Management System (XMS) allows the network managers to guarantee a central configuration, setup and management of safety features (IDS/IPS), a central performance monitoring of all Wi-Fi channels, and central reporting for several hundred Wi-Fi arrays via the installed Layer 3-network.

PoGE injectors available for the power supply to the devices, via the structured Gigabit Ethernet cabling. A central remote power system is designed for a simplified and cost-efficient power supply. Optionally, the arrays can be powered via the integrated power supply unit. The power consumption under full load amounts to 26 to 100 watts, depending on the device.

On the Web: www.daetwyler-cables.com

Sponsored Recommendations

Global support of Copper networks

May 29, 2024
CommScope designs, manufactures, installs and supports networks around the world. Take a look at CommScope’s copper operations, the products we support, our manufacturing locations...

Cat 6A: The Amazingly Versatile, Capable Twisted Pair Solution

May 29, 2024
While its impossible to truly future-proof a network against challenges that dont yet exist enterprise networks can tilt the odds in their favor as they adapt to new application...

Cat 6A Frequently Asked Questions

April 29, 2024
At CommScope we know about network change and the importance of getting it right. Conclusion Category 6A cabling and connectivity.

Revolutionize Your Network with Propel Fiber Modules

Oct. 24, 2023
Four sizes of interchangeable Propel fiber modules provide the breadth of capabilities for virtually any configuration.