The SpecMate center-spine cable tray uses single hangers attached to the center spine rather than a conventional trapeze hanger, so only half the number of hangers is needed, and installation time is reduced. The screw-in rungs have integral grooves for mounting of screw-in accessories (e.g., cable dropouts), and the rungs are easily removed to facilitate installation in tight locations. Wire and cable can be laid in from the side, so cable pulling is eliminated in many installations.
The SpecMate center-spine cable tray uses single hangers attached to the center spine rather than a conventional trapeze hanger, so only half the number of hangers is needed, and installation time is reduced. The screw-in rungs have integral grooves for mounting of screw-in accessories (e.g., cable dropouts), and the rungs are easily removed to facilitate installation in tight locations. Wire and cable can be laid in from the side, so cable pulling is eliminated in many installations.
CommScope’s FiberGuide® Design Pro helps you design a complete fiber raceway for your data center or central office using 2D and 3D technology. This video guides you through the...
