Box/conduit hanger assembly

Nov. 1, 1999
The B18 Series of combination box/conduit hangers now includes the B18CO hanger, which supports multiple runs of conduit on either side of the junction box. The device eliminates conduit bending and the use of extra fasteners in beam applications. It features a preriveted conduit clip in the center hole and two additional slotted holes, allowing conduit clips to be added as needed. Field installation to a beam requires only a hammer. The unit is suitable for beam, drop wire or rod, threaded rod

The B18 Series of combination box/conduit hangers now includes the B18CO hanger, which supports multiple runs of conduit on either side of the junction box. The device eliminates conduit bending and the use of extra fasteners in beam applications. It features a preriveted conduit clip in the center hole and two additional slotted holes, allowing conduit clips to be added as needed. Field installation to a beam requires only a hammer. The unit is suitable for beam, drop wire or rod, threaded rod to beam, and threaded rod to beam-perpendicular assemblies.

ERICO INC.

SOLON, OH

Sponsored Recommendations

March 28, 2025
Bringing University of Tennesee's campus up to speed.
March 28, 2025
CommScope’s FiberGuide® Design Pro helps you design a complete fiber raceway for your data center or central office using 2D and 3D technology. This video guides you through the...
March 28, 2025
CommScope and Equinix work hand in hand to provide client connectivity across the globe