Richco adds four cable support devices

April 22, 2009--Richco PGSB snap bushings convert raw or sharp-edged holes into smooth, insulated holes to protect cables. Snapped into the hole by hand, the PGSB is available in 42 sizes to accommodate various hole diameters, panel thicknesses, and inside diameters.

April 22, 2009--Richco PGSB snap bushings convert raw or sharp-edged holes into smooth, insulated holes to protect cables. Snapped into the hole by hand, the PGSB is available in 42 sizes to accommodate various hole diameters, panel thicknesses, and inside diameters.

In addition, the company has introduced PGM hole plugs, which are available in 34 different sizes to accommodate a variety of hole
diameters and panel thicknesses. The PGM snaps into hole with
fingertip pressure and securely closes off unneeded panel holes.

Also, the MPCG (multi-panel card guide) includes funnel entry for simplified board insertion and flexible wings that allow the card guide to accept PCBs from .032 to .079. The wings are designed to provide good retention to hold boards firmly. Hollow mounting pins are designed for simplified snap-in, and mount into .020 to .079 panel thicknesses. The standard material provides a UL94 V0 flammability rate.

Finally, PGSD adjustable bushings (pictured) convert raw or sharp-edged holes into insulated holes. They accommodate cables, wires, tubing, or any irregular shaped items, and locate the cable in the center of the hole, providing light retention force. The PGSD is snapped into hole with fingertip pressure, and has flexible internal wings that absorb shock and vibration.

On the Web: www.richco-inc.com

More in Home