10-port 100W PoE gigabit switch supports all PD types

Sept. 23, 2020
The IDS-710HP from Perle Systems is a fully compliant IEEE 802.3bt PoE industrial managed switch that supports all PD types, classes, and topologies in a compact DIN rail chassis.
Perle Systems
Ids 710hp Xlg 5f6b9d460b467

Perle Systems (Princeton, NJ) has announced the launch of its IDS-710HP, a fully-compliant IEEE 802.3bt Power over Ethernet (PoE) industrial managed switch. The 10-port gigabit switch comes with eight 100W PoE copper ports, with 450W of total available power, and two SFP slots supporting 1G fiber, 2.5G fiber, or 10/100/1000Mbps copper.

Using PoE technology increases installation flexibility, lowers costs, and makes networks more efficient by eliminating the need to install multiple pieces of equipment, additional electrical wires, or outlets,” comments John Feeney, chief operating officer at Perle Systems. “However, the need to connect power-hungry IoT devices, like pan-tilt-zoom (PTZ) security cameras with heaters, LED lighting in building management, and 802.11ax/ac wireless access points, is driving a need for PoE switches that support higher wattage levels and more types of PDs.”

In addition to transmitting network data, the IDS-710HP has a built-in PoE injector to supply up to 100W PoE per port for a total of 450W across all eight copper ports. Classified as Layer 2 Power Sourcing Equipment (PSE), the switch will detect if connected devices are PoE-compatible and will automatically supply power. The company notes its IDS-710HP will not need to be replaced as PDs are updated because, as a fully 803.2bt compliant switch, it supports all PD types, classes, and topologies, including:

  • Type 1, 2, 3, and 4
  • Class 1, 2, 3, 4, 5, 6, 7, and 8
  • Single-signature and Dual-Signature

The IDS-710HP also has the ability to reboot attached PDs remotely. A PD power reset from the IDS-710HP will save technicians a trip to the PD location, which may be in very difficult to access locations like exterior walls, ceilings, light posts, pipelines, and kiosks.

The Perle IDS-710HP PoE industrial managed switch also comes with a "PRO Feature Set" to meet the needs of enterprise-grade environments where additional security and network integration functionality is required. The switch's Pro Feature Set includes:

  • PROFINET and Modbus TCP protocols supported for monitoring and device management.
  • Ring Protocol MRP (IEC 62439-2) for ensuring less than 10ms recovery time.
  • STP/RSTP/MSTP provides network redundancy.
  • Advanced Security and IT management features include TACACS+, RADIUS, 802.1x, SSH, SNMPv3, and HTTPS.
  • IEEE 1588 V1 and V2 PTP provides a method for clock synchronization with microsecond accuracy.
  • Advanced protocols that optimize the performance and intelligence of the network include IGMP Snooping, LLDP-MED, GVRP, Voice VLANs, MSTP, GMRP, and IPv6 MLD Snooping.

The rugged fan-less switches feature a corrosion resistant IP20 aluminum case, a voltage range of 44 to 57 volts DC, and operate in temperatures from -40 to 70°C. 

For more information, visit www.perle.com

Sponsored Recommendations

Global support of Copper networks

May 29, 2024
CommScope designs, manufactures, installs and supports networks around the world. Take a look at CommScope’s copper operations, the products we support, our manufacturing locations...

Flex Vertical: FiberGuide

May 29, 2024
CommScope Offers the largest selection of vertical cable managmeent options in the industry.

Constellation: Building edge infrastructure for a hyperconnected future

May 29, 2024
Connecting and powering the hyperconnected enterprise

Cat 6A: The Amazingly Versatile, Capable Twisted Pair Solution

May 29, 2024
While its impossible to truly future-proof a network against challenges that dont yet exist enterprise networks can tilt the odds in their favor as they adapt to new application...